Periodic Structural / Facade Inspection and Rectification (PSI/PFI)
Ensuring Compliance. Enhancing Building Safety.
At Ample Building Services, our dedicated team offers comprehensive Periodic Façade Inspection (PFI) and Periodic Structural Inspection (PSI) services—fully aligned with Singapore’s Building Control (Periodic Inspection of Buildings and Building Façades) Regulations 2021.
Periodic Structural Inspection (PSI)
Conducted every 5 years for non-residential buildings (and every 10 years for predominantly residential buildings), PSI is essential for verifying the structural stability and integrity of key load-bearing elements—be it columns, beams, slabs, or foundations.
Our Water Leakage Solutions
We cover comprehensive detection, repair, and prevention works against water leakage.
From roof and wall leaks to plumbing and waterproofing issues, we provide effective methods to restore and protect your property with lasting results.
Spalling Concrete in Structural Elements
Hacking out loose concrete, removing corroded rebar rust, re-barring if required, patching with structural repair mortar
Structural Cracks in Beams, Slabs, Columns
- Epoxy injection for fine cracks
- Section strengthening with steel plates or fibre-reinforced polymer (FRP) wraps
- Partial member replacement if severely compromised
Corroded Steel Structures
- Mechanical removal of rust, application of zinc-rich primer and protective paint
- Replacement of severely corroded members
Foundation or Substructure Deterioration
- Soil stabilisation or underpinning for settlement issues
- Concrete jacketing for piles or columns
Overloaded or Damaged Members
- Reinforcement or stiffening of overstressed beams/trusses
- Redistribution of loads via temporary propping until repairs complete
Periodic Façade Inspection (PFI)
Triggered when buildings exceed 20 years in age and 13 metres in height, the PFI cycle occurs every 7 years. Designed to safeguard public safety, this involves proactive detection and rectification of façade distress such as loose tiles, cracked plaster and corroded features.
Loose or Detached Façade Elements
- Re-fixing or replacing loose wall tiles, cladding panels, or stone veneers
- Injection grouting to re-bond hollow tiles or plaster
Cracked or Spalling Plaster / Concrete
- Chipping off loose material, repairing with polymer-modified mortar
- Repainting after surface preparation to seal and protect
Corroded Metal Fixtures & Anchors
- Treating corrosion, replacing rusted brackets, anchors, or railing fixings
- Applying anti-corrosion coatings
Sealant & Joint Failures
- Cutting out deteriorated sealants
- Re-applying weatherproof silicone or PU sealants
Water Ingress Points
- Re-waterproofing façade junctions, window perimeters, and coping edges
- Installing or repairing flashing and drip edges
Falling Hazard Items
- Securing loose signage, sunshades, louvres, or air-con ledges
- Removing unsafe elements that cannot be repaired
Simplifying the Process
Find a problem? Reach out to us for a site viewing!
We’ll drop by for a site visit and furnish a quote.
Once the works are approved, we’ll carry out the works as scheduled.
We’re done! An invoice will be sent to you for payment.
Frequently Asked Questions
Why are PSI and PFI required in Singapore?
PSI and PFI inspections help ensure buildings remain safe over time. Regular inspections allow building owners to detect structural or façade defects early before they become serious safety issues.
Many property owners engage a trusted construction company singapore or building contractor singapore to coordinate inspections and manage the required repair works.
What happens if defects are found during PSI or PFI?
If defects are identified during a periodic structural inspection or periodic facade inspection, rectification works must be carried out to address the issues.
These repairs may include concrete restoration, façade repairs, waterproofing works, or structural strengthening. Experienced construction contractors are typically engaged to ensure repairs are carried out safely and in accordance with engineering recommendations.
Who should conduct PSI / PFI rectification works?
Rectification works should be handled by a qualified contractor with experience in structural repairs and building maintenance.
Ample Building Services supports PSI / PFI rectification works as part of our broader construction services singapore, coordinating structural, façade, and repair works under a licensed general contractor singapore.
How often are PSI and PFI inspections required?
The frequency of PSI and PFI inspections depends on building regulations and the age of the building. Property managers typically schedule inspections as part of long-term building maintenance singapore programmes to ensure ongoing safety and compliance.
Do PSI / PFI works affect building operations?
In many cases, inspection and rectification works can be carried out while buildings remain operational. Experienced construction contractors plan work schedules carefully to minimise disruption to occupants and daily operations.
Contact Us
Ready to Start Your Next Project?
Address
15 Changi North Street 1 #01-36
I-Lofts @ Changi, Singapore 498765
phone number
SG: +65 6442 2277 / +65 8930 9860
